L-Care Commercial

From: £6.00

L-Care Commercial  fluorine free textile and leather treatment is an easily-applied dirt and water-repellent nano coating. It is particularly effective on leather and textile upholstery, footwear and clothing. Not only does L-Care  Commercial provide excellent protection for textiles, it also nourishes leather to regain appearance, feel and suppleness.
N.B. 30ml L-Care sample is not sufficient for a full wash-on application.

N.B. All 1 litre bottles are shipped with a tamper evident screw tops. Trigger sprays are available to purchase on the site if needed.



 L-Care Commercial: fluorine free leather and textile ‘spray-on’ or ‘wash-on’  treatment provides excellent dirt and water repellent protection.

Textiles :

L-Care Commercial can be applied to all absorbent textile materials including :-

  • Footwear
  • Apparel
  • Upholstery and soft furnishings
  • Camping equipment
  • Sports equipment

It provides excellent hydrophobic and dirt repellent performance, without affecting the look and handle of the fabric.

Leather :

L-Care Commercial can be applied to any smooth or lightly textured leather including :-

  • Footwear
  • Upholstery
  • Clothing
  • Luggage
  • Saddlery

It nourishes leather to regain appearance, feel and suppleness.

L-Care leather and textile treatment is a silicon dioxide (SiO2) based coating with performance attributes that are achieved through a unique combination with wax hybrid structures. This intelligent coating corresponds with the ZDHC joint road map, which we fully support as part of our drive for sustainability within the textile industry.

Additional information

Weight N/A
Chemical basis:

combination of modified silicon dioxide and wax

Layer thickness:

> 300 nm

Water resistance:

between 130° and 150° (20µl)

Oil resistance:


Slip angle:

not applicable

Temperature stability:


Chemical stability:

between pH 3 and pH 11

Weather resistance:

500h pursuant to ISO 11507 A

Wash stability:


Salt water resistant:




Storage stability:

1 year

Temperature sensitivity:

1°C to 30°C


30 – 50 ml/m2


the coating is applied to the surface using standard pump spray. If the substrate cannot instantly absorb the liquid,
e.g. smooth leather, it should be rubbed in using gentle polishing motions. The coating is fully cured after 24 hours.


30ml, 1l, 5l, 20l, 200L


Application Instructions

Spray-on application

As a fluorine-free spray product application pure or as a 50:50 diluted

1)The coating is applied using a standard trigger pump spray.

2) If the substrate cannot instantly absorb the liquid, e.g. smooth leather, rubbed in with application cloth using gentle polishing motions.

3) The coating is fully cured after 24 hours.

Use a clean lint free cloth for application and wear gloves

Wash-on  application

1) As a fluorine-free wash-in product  the dosage is 150-250ml per item or garment, wash on a “sensitive program” with  low spinning, no heat curing is required.

Nanoflex L-Care SDS sheet


Please Note: We only deliver to registered UK addresses with a valid Post Code.

We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.

Please notify us if you have specific delivery requirements such as a restricted access, requirements for a tail-lift delivery vehicle or pallet truck. Failure to notify us of special delivery instructions can incur additional charges from our carriers.