Welcome to Showerguard™, the most revolutionary and durable labour-saving product available in bathroom protection, it prevents limescale and makes glass and other non-absorbent surfaces easy clean.

Showerguard™ provides protection for shower enclosure glass, glazed ceramic titles porcelain and mirrors. Easy maintenance for new and existing bathroom furniture with the strongest and most durable glass improvement system available.

The nano-particles within Showerguard™ form a strong bond with the surface of the glass, glazed ceramic tiles, porcelain and mirrors giving it a smooth anti-stain, non dis-colouring surface layer.

The coating is crystal clear, UV stable, chemically inert and extremely durable, having both hydrophobic and oleophobic capabilities providing a robust defence against the build-up of limescale, soap residues and urine scale. Cleaning frequency can be reduced by as much as 70%.

Showerguard™ products are all non-toxic and environmentally friendly, all packaging including bottles can be recycled and the cloths can be reused.

One easy application gives permanent protection to approximately 3m²

Kit Contents

• 1 x 30ml Showerguard™
• 1 x 30ml Pre-clean
• 1 x Pre-clean application cloth (white)
• 1 x Showerguard™ application cloth (blue)
• Gloves

Covers approximately 3m²

1. Ensure that the newly installed glass and bathroom furniture is dry and free from installation grease and dirt. Prepare the surface by using the Pre-clean solution and the white cloth.

2. Coat with Showerguard™ when the surface is free from streaks. Using the blue cloth ensure even and complete coverage of the surface.

3. The surface can be touched immediately after coating, but it will be fully cured after 24hrs when the shower can be used
4. Ongoing cleaning will be easier and can be done with any suitable non-abrasive household glass-cleaning product, do not use abrasive scrubbing equipment for cleaning.

Helpful hint – divide the surface into small areas to minimise rapid evaporation of the product

Kit Contents

• 1 x 150ml Signo Limescale remover
• 1 x 30ml Showerguard™
• 1 x 30ml Pre-clean
• 1 x Pre-clean application cloth (white)
• 1 x Showerguard™ application cloth (blue)
• Gloves

Covers approximately 3-4m ²

1. To refurbish existing showers and bathroom furniture firstly thoroughly clean all the area of built up limescale and soap residues with Signo Limescale remover in the pack, this needs to be applied and left for 20 minutes to work. Rinse thoroughly using a cloth (not provide) to remove stubborn marks.
2. Once the surface is dry and free from limescale and soap residue, prepare the surface by using the Pre-clean solution and the white cloth.
3. Coat with Showerguard™ when the surface is free from streaks. Using the blue cloth ensure even and complete coverage of the surface.
4. The surface can be touched immediately after coating, but it will be fully cured after 24hrs when the shower can be used
5. Ongoing cleaning will be easier and can be done with any suitable non-abrasive household glass-cleaning product, do not use abrasive scrubbing equipment for cleaning.

Helpful hint – when applying the Pre clean and Showerguard™ divide the surface into small areas to minimise rapid evaporation of the product