Description
Showerguard™ Easy Clean Coating for new and existing shower installations, provides protection for shower enclosure glass, glazed ceramic titles porcelain and mirrors. Easy maintenance for new and existing bathroom furniture with the strongest and most durable glass improvement system available.
The nano-particles within Showerguard™ form a strong bond with the surface of the glass, glazed ceramic tiles, porcelain and mirrors giving them a smooth anti-stain, non dis-colouring surface layer.
The coating is crystal clear, UV stable, chemically inert and extremely durable, having both hydrophobic and oleophobic capabilities providing a robust defence against the build-up of limescale, soap residues and urine scale. Cleaning frequency can be reduced by as much as 70%.
Showerguard nano-coating products are user and environmentally friendly, all packaging including bottles can be recycled and the cloths can be re-used.
Showerguard™ Kit Contents
- 1 x 150ml Signo Limescale remover
- 1 x 30ml Showerguard™
- 1 x 30ml Pre-clean
- 1 x Pre-clean application cloth (white)
- 1 x Showerguard™ application cloth (blue)
- Gloves
One easy application gives permanent protection to approximately 3m2
Showerguard ™ Easy Clean Coating active to Optiperl
Hazards
Showerguard coating
Danger
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P233 Keep container tightly closed
P280 – Wear Protective clothing, eye protection and protective gloves
P303 + P361 + P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water /shower
P305 + P351 + P338 – IF IN EYES : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 – If eye irritation persists: Get medical advice/attention
Application Instructions
For showers/glass that has been in use for some time where contamination has built up, remove existing limescale and staining by following the Limescale and residue removal instructions below: –
Limescale and residue removal:- Spray the Signo limescale remover all over the glass surface from top down. Leave for twenty minutes for full activation, then return to rinse heavily with water using cloth (not provided) to rub away all residues; then dry thoroughly.
Note: If all limescale and contaminants are not removed on first attempt, re-apply, ensuring glass is completely clean and clear and then continue to Step 1 below.
—————-
For newly installed shower glass that has not been in use, continue to follow the instructions below (retain the limescale remover for other cleaning and de-scaling tasks): –
Coating glass (and ceramic) surfaces with Showerguard™
1.Preparation of glass surface with Pre-clean
Ensure glass is dry, and clear of grease and dirt. Spray the inside of the glass screen with Pre-clean and rub the product into the glass surface with the pre-cleaning cloth (white). Divide the surface into sections for treatment of about 0.25m2 to minimise rapid evaporation of the product.
The glass is ready for coating application when streak formation from the Pre-clean is no longer evident. Apply the Showerguard™ coating immediately after the whole glass surface has been pre-cleaned and is dry and smooth.
- Coating with Showerguard™
After pre-cleaning, spray Showerguard™ onto the inside glass surface, ensuring good coverage. Spread the product around the glass surface with the coating cloth (blue) to ensure complete coverage of the surface.
Because of the rapid evaporation of the product, divide glass panes into sections for treatment of about 0.25m2. After spraying each section of glass, polish in one operation with the coating cloth. Continue to polish until the surface feels totally smooth. Each 30ml bottle should cover approximately 3m2 of glass. Use any excess product to treat the outside of your screen, or any other ceramics or porcelain, following the above pre-cleaning steps.
