Pre-Clean PC – Surface Cleaner & Degreaser

From: £3.00

Pre-Clean PC is a residue cleaning preparation for optimising Glassguard™ and can be used on all types of glass and hard surfaces such as, shower glass, car windscreens and vitreous surfaces.

Coverage 5ml/m2

N.B. All 1 litre bottles are shipped with a tamper evident screwtop. Trigger sprays are available.

Description

Pre-Clean PC is a residue cleaning preparation for optimising Glassguard™ and can be used on all types of glass such as, shower glass and car windscreens.

Pre-Clean is an alcohol based cleaner, and it’s use is required before coating application in order to de-grease and pre-clean the surface. Any contamination on the surface will impede the coating from bonding.

 

Additional information

Weight N/A
Chemical basis:

Ethanol

Layer thickness:

N/A

Water resistance:

N/A

Oil resistance:

N/A

Slip angle:

N/A

Temperature stability:

N/A

Chemical stability:

N/A

Weather resistance:

N/A

Durability (mechanical):

N/A

Salt water resistant:

No

Transparency:

100%

Storage stability:

> 2 years

Temperature sensitivity:

-3°C to 30°C

Consumption:

5 ml/m2

Application:

Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Polish until the surface is dry and free of visible streaks.

Standard Unit Size

30ml, 200ml, 1l, 5l, 20l

Hazards

Danger

Hazard statements

H225 Highly flammable liquid and vapour

H319 Causes serious eye irritation

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking

P280 Wear protective gloves/eye protection.

P305+P351+P338 IF IN EYES:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.  Continue rinsing

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.

P403+P235 Store in a well-ventilated place. Keep cool.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations

 

 

Application Instructions

  1. When used to pre-clean hard surfaces apply by trigger spray and polish in to remove dirt and grease with cloth.

Use a clean lint free cloth for application and wear gloves.

Pre-Clean SDS sheet

Download

Please Note: We only deliver to registered UK addresses with a valid Post Code.

We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.

Please notify us if you have specific delivery requirements such as a restricted access, requirements for a tail-lift delivery vehicle or pallet truck. Failure to notify us of special delivery instructions can incur additional charges from our carriers.