Description
Sandblasted Glass Coating (SG 70) is a protective nano-coating for use on sandblasted or etched glass.
The smart coating gives glass a permanent anti-fingerprint finish that prevents glass aesthetics from being compromised either during installation or during its lifetime. The hydrophobic coating of the textured glass structure ensures that grease and dirt can be easily removed with conventional solvent-based glass cleaners.
For the glass processor or equipment manufacturer, SG 70 provides a quick and easy-to-apply solution to protect sandblasted glass against limescale, soap scum and other dirt/fingerprint build up and staining.
Nano Care’s range of glass-protecting/improvement hydrophobic and oleophobic coating products constitute the most comprehensive collection on the market. Once applied, nanoscale protective layers bond with the substrate to leave a smooth, anti-stain, non-discolouring surface layer.
Applications protect glass and polished porcelain with an ultra-hydrophobic film, reducing limescale and soap scum and providing an anti-fingerprint finish.
Hazards
Danger

H304 Maybe fatal if swallowed and enters airway.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
EUR066 Repeated exposure may cause skin dryness or cracking.
P102 Keep out of reach of children.
P261 Avoid breathing mist/vapours/spray.
P262 Do not get in eyes, on skin, or on clothing.
P273 Avoid release to the environment
P301 + P310 + P331 IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician. Do not induce vomiting.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention
P501 Dispose of contents/container in accordance with local regulations.
Application Instructions
Nanoflex® SG 70
1) After a pre-clean, the manual coating method involves a simple cloth application.
2) A small quantity (15 ml/m2) is applied to the surface, spread around using a clean cloth and polished out to achieve even coverage.
3) For larger sections, buffing-up to previously applied sections is easily achieved.
4) Coated products can be handled after 1 hour’s drying and dispatched on the day of application, full curing achieved after 24hrs at 20oC.
Use a clean lint free cloth for application and wear gloves
Where automated application is required, please contact us for advice.